WiCo E1

Features

– 8 channel telemetry (100M Ethernet)
– 1 or 2 radio channels (900MHz or 2.4Ghz with a range up to 500 meters)
– software that allows you to work without physical control panels
– 12 tally inputs on the Remote block

WiCo R1

Features

– Affordable and easy to use system
– Allows to control 2 cameras via single UHF channel (900MHz or 2.4GHz)
– Green and Red tally lights
– Standard 1/4" tripod thread on the camera unit

WiCo C1

Features

– RS422 to Sony 700 protocol/Sony 700 protocol to RS422
– 4 GPIO (embedded as tally and call)
– galvanic isolated RS422
– no handshakes outside converter
– standard RS422 baudrates
– 8-pin or external power supply
– RCP/RMB can be powered via converter 8-pin

WiCo C2

Features

– ip to Sony 700 protocol/ Sony 700 protocol to ip
– 4 GPIO (embedded as tally and call)
– no handshakes outside converter
– 8-pin/PoE/external power supply
– RCP/RMB can be powered via converter 8-pin

 

 

WiCo E1 is a full telemetry which includes both Ethernet and radio channels. This combination was made to meet production demands for working in various conditions. What is more, the set up won't need much effort as there are no sophisticated settings. All you need to do is to connect cameras and RCP/RMBs to the respective blocks and work.

 

 

The system consist of the Camera Block, Remote Block and Camera Unit(s). Up to 7 Cameras are connected to the Camera Block RJ45 connectors. 1 or 2 cameras can be connected to the Camera Block via radio channel (900MHz or 2.4GHz package). Camera Block is connected to the Remote block via Ethernet. Remote block allows you to work with up to 8 RCP/RMBs at the same time.

 

 

What's more you can use USB cable to connect Remote block to the PC and control your cameras with the software that resembles all familiar RCP design. Commands from our software or RCP are sent the Remote block via Ethernet interface and then transmitted to the Camera Block, which is sending commands to the cameras via Sony interface.
The camera unit is powered by the camera remote 8pin, which also aides data transmission and makes it very convenient. Given it's light weight and tripod thread, fixing the camera would be simple and easy. As an option Anton Bauer/V-lock mounts are also available for those who would need them.

 

 

Specification

Camera Module

  • Camera Module
  • 7xRJ45 Neutrik(for camera)
  • 1xRF In SMA-F
  • Green\Red Tally Outputs DB15F
  • USB connector(for PC)
  • RJ45 Neutrik Ethernet
  • Power In 180-230V AC(IEC320-C14)

Base Module

  • 8xRJ45 Neutrik(for RCP/RMB)
  • Green\Red Tally Intputs DB15F
  • USB connector(for PC)
  • RJ45 Neutrik Ethernet
  • Power In 180-230V AC(IEC320-C14)
 

RF(2400)*

  • Frequency 2.4GHz
  • Modulation GMSK
  • TX Power 1W
  • Range 400-500m/1300-1700ft
  • RX Sensitivity -94dBm
  • TX data 500kbps

RF(900)*

  • Frequency 900MHz
  • Modulation GMSK
  • TX Power 200mW
  • Range 400-500m/1300-1700ft
  • RX Sensitivity -94dBm
  • TX data 200kbps

Physical

  • Camera Block W 422mm, D 197mm,
    H 44mm
  • 2kg/4.4lbs
  • RCP/RMB Block W 422mm, D 197mm, H 44mm
  • 2kg/4.4lbs

*Please note that one of the chosen frequencies can be restricted for using in your country. Contact us at This email address is being protected from spambots. You need JavaScript enabled to view it. for more info.