WiCo R1

Features

– Affordable and easy to use system
– Allows to control 2 cameras via single UHF channel (900MHz or 2.4GHz)
– Green and Red tally lights
– Standard 1/4" tripod thread on the camera unit

WiCo E1

Features

– 8 channel telemetry (100M Ethernet)
– 1 or 2 radio channels (900MHz or 2.4Ghz with a range up to 500 meters)
– software that allows you to work without physical control panels
– 12 tally inputs on the Remote block

WiCo C1

Features

– RS422 to Sony 700 protocol/Sony 700 protocol to RS422
– 4 GPIO (embedded as tally and call)
– galvanic isolated RS422
– no handshakes outside converter
– standard RS422 baudrates
– 8-pin or external power supply
– RCP/RMB can be powered via converter 8-pin

WiCo C2

Features

– ip to Sony 700 protocol/ Sony 700 protocol to ip
– 4 GPIO (embedded as tally and call)
– no handshakes outside converter
– 8-pin/PoE/external power supply
– RCP/RMB can be powered via converter 8-pin

WiCo telemetry has been designed in close co-operation with video engineers from around the globe who contributed their priceless experience to result in a user-friendly system. The main goal for developers was to make it simple, so that even inexperienced users can intuitively use the system.

The system consists of the base unit connected to the RCP/RMB and the camera unit connected to the camera. The modified system can also include the radio unit connected to the base unit. This may increase the range and allow it to extend beyond interfering objects.

The camera unit is powered by the camera’s 8pin remote, assisting convenient data transmission. Given that it’s light-weight and has a tripod thread, fixing the camera is simple and stress-free.

WAYS OF CONNECTION

1. ONE CAMERA SET UP

2. TWO CAMERA SET UP

3. TWO CAMERA SET UP WITH THE COMPUTER

4. SET UP WITH THE COMPUTER

 

Specification

Camera Module(receiver)

  • RX RF In SMA-F
  • GPIO
  • Green\Red Tally LAMP
  • Control Data Out Hirose 8 pin MXR
  • Power In 12-16VDC Hirose 8 pin MXR (powering from the camera)

Base Module (transmitter)

  • RCP\RM-b\MSU\CCU Inputs 1 to 2 MXR 8 pin
  • GPIO DB9
  • Power In XLR Socket
  • RF Out SMA-F
 

RF(2400)*

  • Frequency 2.4GHz
  • Modulation GMSK
  • TX Power 1W
  • Range 400-500m/1300-1700ft
  • RX Sensitivity -94dBm
  • TX data 500kbps

RF(900)*

  • Frequency 900MHz
  • Modulation GMSK
  • TX Power 200mW
  • Range 400-500m/1300-1700ft
  • RX Sensitivity -94dBm
  • TX data 200kbps

Physical

  • Camera Unit W 85mm, D 85mm, H 30mm
  • 150g/0.33lbs
  • Base Unit W 120mm, D 120mm, H 35mm
  • 300g/0.66lbs

*Please note that one of the chosen frequencies can be restricted for using in your country. Contact us at This email address is being protected from spambots. You need JavaScript enabled to view it. for more info.